Samsung MWR-WE11N Installation Manual page 7

Tracking Your Indoor Unit from the Wired Remote Controller
Displays the total number
of units searched
1. Tracking of your Wired Remote Controller will automatically start when you turn on the power after installation.
2. If you want to perform tracking again after installation, then press the Delete and ESC buttons at the same time
for more than five seconds.
The system will reset, and tracking will start again.
3. During tracking, the total number of currently searched indoor units and ventilator(ERV) will be displayed.
4. It may take about 5 minutes at initial installation or when you re-set the Master setting.
Indicates tracking
in progress
Delete and ESC buttons at the same time
7