CTC Union IMC-100M-E Quick Installation Manual

Installation
The converter can be mounted on the wall or installed in DIN rail depending
on your installation needs. When installing the wall-mounting bracket
(optional accessory) and DIN rail bracket, be sure to correctly align the
orientation pin.
Figure 8. DIN Rail
The converter with DIN Rail bracket has a steel spring in the upper rail of the
bracket. This spring is compressed for mounting and un-mounting by applying
downward force.
Figure 10. Mounting
CTC Union Technologies Co., Ltd.
Far Eastern Vienna Technology Center
(Neihu Technology Park)
8F, No. 60, Zhouzi St., Neihu District, Taipei 114
Taiwan
© 2014 CTC Union Technologies Co., Ltd.
All trademarks are the property of their respective owners.
Technical information in this document is subject to change without notice.
Introduction
IMC-100M(-E) are Managed Fast Ethernet media converters that
support conversion between electrical 10/100Base-TX and optical
100Base-FX Ethernet. Housed in rugged DIN rail or wall mountable
enclosures, these converters are designed for harsh environments, such
as industrial networking and intelligent transportation systems (ITS) and
are also suitable for many military and utility market applications where
environmental conditions exceed commercial product specifications.
Package List
 IMC-100M(-E) device with terminal block
 Quick Installation Guide
 Din Rail with screws
Features
 Redundant dual DC inputs 12/24/48VDC
 IP30 rugged metal housing
 Support jumbo frames 9K bytes
 Wide temperature range -20°C~75°C (IMC-100M-E)
 Industrial grade EMS, EMI, UL60950-1, EN 50121-4,
EN61000-6-2, EN61000-6-4
Specifications
Optical Interface
 Standard: IEEE802.3u
 Multimode (2km) 50/125um, 62.5/125um
 Single mode (30km or 50km) 9/125um
 Wavelength: 1310nm (S/M or M/M)
 BiDi option (20km) for Single mode single fiber
Ethernet Interface
 Standards: IEEE802.3, 802.3u, 802.3x
 Connector: RJ-45 (shielded)
 Auto MDI/MDI-X
 Speed: 10/100Base-TX (Auto)
 Duplex: Full/Half (Auto)
 1024 MAC table
 MTU: 9600 bytes
 Link Fault Pass Through (LFP)
 Auto Laser Shutdown (ALS)
 Ingress/egress bandwidth control
 IEEE802.1Q VLAN tagging
www.ctcu.com
Figure 9. Wall Mount
Figure 11.Un-mounting
T +886-2-26591021
F +886-2-26590237
E sales@ctcu.com
- 7 -
- 1 -
Quick Installation Guide
IMC-100M
IMC-100M-E
Industrial Managed with OAM 10/100Base-TX to 100Base-FX Fiber Converters
sales@ctcu.com
Specifications (cont.)
Power
 Absolute Range: 9.6VDC~60VDC
 Support Power Input Reverse Polarity Protection
 Support Dual Power Inputs
 Connector: Removable terminal block
 Consumption: 4.2W
Mechanical
 Water & Dust Proof: IP30 Protection
 Dimensions: 106 mm (D) x 39 mm (W) x 142 mm (H)
 Mounting: DIN-Rail, Wall Mount (Optional)
 Weight: 630 g (1.4 lb)
Environmental
 Operating Temperature: -10°C~60°C (IMC-100M); -20°C~75°C (IMC-
100M-E)
 Storage Temperature: -40°C~85°C
 Humidity: 5%~95% (Non-condensing)
Certifications
 EMC: CE
 EMI (Electromagnetic Interference): FCC, FCC Part 15 Subpart B Class
A, CE EN55022 Class A
 Railway Traffic: EN50121-4
 Immunity for Heavy Industrial Environment: EN61000-6-2
 Emission for Heavy Industrial Environment: EN61000-6-4
 EMS (Electromagnetic Susceptibility) Protection Level:
 EN61000-4-2 (ESD) Level 3, Criteria B
 EN61000-4-3 (RS) Level 3, Criteria A
 EN61000-4-4 (Burst) Level 3, Criteria A
 EN61000-4-5 (Surge) Level 3, Criteria B
 EN61000-4-6 (CS) Level 3, Criteria A
 EN61000-4-8 (PFMF, Magnetic Field) Field Strength: 300A/m,
Criteria A
 Safety: UL60950-1
 Shock: EN60068-2-27
 Freefall: EN60068-2-32
 Vibration: EN60068-2-6
 MTBF (MIL-HDBK-217): 1,008,898 Hours
- 2 - V1.3