Table of Contents
Advertisement
1MAC457436-IB B
4.3.4
620 series ANSI
Installation Manual
A
B
GUID-BECAF758-CADF-4718-8693-A7D715FBA71E V1 EN
Figure 13:
Semi-flush mounted IED
A 11.02 inches (280 mm)
B 6.97 inches (177 mm)
C 7.91 inches (201 mm)
D 4.06 inches (103 mm)
E 3.86 inches (98 mm)
F
6.30 inches (160 mm)
Check the allowed minimum bending radius from the optical cable
manufacturer.
Rack mounting the IED
A mounting kit is needed for rack mounting the IED. The 19" rack mounting kit includes
screws and a mounting panel.
1.
Mount the mounting panel to a 19" rack.
2.
Loosen the four M5 fixing screws in the case to fit the case into the panel cut-out.
3.
Mount the case to the panel cut-out.
Section 4
Mounting
C
D
E
F
25
Advertisement
Table of Contents
