Section 3 Unpacking, Inspecting And Storing; Removing Transport Packaging; Inspecting Product And Delivery Items; Identifying Product - ABB 620 series ANSI Installation Manual

1MAC457436-IB B
Section 3
3.1
3.2
3.2.1
3.2.2
620 series ANSI
Installation Manual
Unpacking, inspecting and storing

Removing transport packaging

Protection relays require careful handling.
1. Examine the delivered products to ensure that they have not been damaged during
the transport.
2. Remove the transport packaging carefully without force.
3. Attach the protective film (supplied with the protection relay) on the top side of the
unit for the installation phase.
Before connecting the auxiliary power, remove the protective film
from top of the protection relay.
The cardboard packaging material is 100% recyclable.

Inspecting product and delivery items

Identifying product

1. Locate the protection relay's order number from the label on top of the plug-in unit.
2. Compare the protection relay's order number with the ordering information to verify
that the received product is correct.

Checking delivery items

Check that all items are included in the delivery in accordance with the delivery
documents.
Unpacking, inspecting and storing
Section 3
9