Addendum 5: Meter Factory Default Settings - Accumet AP75 Operating Instructions Manual

16. Addendum 5: Meter factory default settings

Type Parameter
P1.0 Memory clear
P2.1 Viewing previous – – –
calibration data
P2.2
P2.3
P2.4
P2.5
P3.1 Viewing
probe data
P3.2
P3.3
P3.4
P3.5
P4.1 Ready indicator/
auto endpoint
P4.2 Select °C/°F
P4.3 ATC on or off
P4.4 TDS factor
P5.1 Temp. coefficient
P5.2 Normalization
temperature
P6.1 Cell constant
P8.0 Factory default
Notes
The P7.0 clock function retains the year and time that you set, even after reverting to
factory default settings.
Default Remarks
no Retains current memory
No calibration data for 1st range
– – – No calibration data for 2nd range
– – – No calibration data for 3rd range
– – – No calibration data for 4th range
– – – No calibration data for 5th range
1.0 No offset for effective cell constant (1st range)
1.0 No offset for effective cell constant (2nd range)
1.0 No offset for effective cell constant (3rd range)
1.0 No offset for effective cell constant (4th range)
1.0 No offset for effective cell constant (5th range)
READY/ON Ready indicator on; auto endpoint off
°C Degrees Celsius
ATC on —
0.5 Adjustable from 0.4 to 1.0
2.1% per °C Adjustable from 0 to 10%
25°C Adjustable from 15 to 30°C
1.0 Select from K = 1.0, 0.1 or 10
no Retains your current settings
49