Panasonic AV-HS60C4E Operating Instructions Manual page 11

<VMEM> button
<PLUG IN> button*
* This is a function to be supported in the future.
2 Multi-selection menu panel
When the mode selection button is pressed, the menu to be displayed is switched.
For details, refer to .
Transition area
3
1
3
1 Transition target selection buttons (<BKGD>/<KEY1>/<KEY2>/<KEY3>/<KEY4>)
Sets the operation target for the next transition to be executed when the fader lever or <AUTO>/<CUT> button is operated.
2 <MCRO ATCH> button
Switches between enabling/disabling macro attach functions assigned to the button of the corresponding ME.
f When set to on, the macro attach function is enabled.
f The button to which the macro attach function is assigned is illuminated in a specific color while it is on. The light color setting can be made from
the <SYS> button on the top menu → [CTRL PANEL] → [Button Color] tab → [Macro Attach] in the [No Sel Other] column.
3 Status display
Displays the key type (KEY only)/transition type/transition time.
4 <PATT LIMIT> button
Restricts the amount of the background wipe transition for the corresponding ME.
f When set to on, the pattern limit function is enabled.
f Set pattern limit details from the <ME1>/<ME2> button on the top menu → [BKGD] → [Position] tab → [Pattern Limit] column.
5 Transition type selection buttons (<NAM>/<MIX>/<WIPE>/<EMEM LINK>)
<MIX> button
<WIPE> button
<EMEM LINK> button
6 <ME CHG> button
Switches the display of the multi-selection panel area to the menu for changing ME which is the operation target.
7 Wipe direction selection buttons
Selects the wipe direction when executing the background transition. The operation is not performed when the transition is a key.
<N> button
<R> button
<N/R> button
8 Fader lever/transition status
Used to execute background or key transitions. When the lever is moved as far as it will go, the transition is completed. If the fader lever has been
operated during auto transition, auto transition will be switched to manual operation as soon as the fader lever position overtakes the amount of the
transition being executed.
For details on the transition status display, refer to "Transition status display" (page 12).
Records [CLIP1] through [CLIP4] (video memory) and [STILL1] through [STILL4] (still image memory) to the current
frame memories and plays them back.
f When using the Storage Module AV-HS60D1 (optional), register memories can be registered/recalled/deleted on SSD
installed in the Main Frame AV-HS60U1/AV-HS60U2.
Used as a plug-in software menu.
1
2
CHR LIN
MIX MIX
4
02s01f 01s00f
5
MIX
6
01s00f
Switches images while overlapping. During the transition, the output total of the A bus and B bus is kept at 100%.
In background transition, the above operation is applied when the <NAM> button is off. If the <NAM> button is on,
images are switched between the A bus and the B bus with non-additive mixing. High luminance images with the A bus
100% and the B bus 100% are output when the fader lever is positioned midway.
Performs transition according to the patterns set in the menu or selected at the wipe preset on the multi-selection panel
area.
Performs transition according to the patterns registered in the event memory.
Wiping proceeds in the normal direction.
Wiping proceeds in the reverse direction.
The normal direction is replaced with the reverse direction (or vice versa) when the transition is completed.
f On/off of the <N>/<R> button is also switched according to the wipe direction.
LUM FULL
MIX WIPE
01s00f 01s00f
ME1
Part Names and Functions
7
8
9
10
11