Panasonic AV-HS60C4E Operating Instructions Manual page 10

Part Names and Functions
<UTIL 1/2> button
<MCRO> button
<DSK1 F/S> to <DSK4 F/S>
buttons
2 KEY bus crosspoint buttons (1 to 16)
Selects the source of the bus which was selected by the KEY bus selector buttons.
Source can be selected using the <2nd PAGE>/<3rd PAGE> button. (Maximum of 64) (page 10)
3 Source name display panels
Displays applications of the crosspoint buttons. The display settings of the source name display panels can be made from the <CONF> button on the
top menu → [SOURCE NAME] → [Panel Name] tab.
When operating other than macro bus: "crosspoint number" on the upper line, "input source name" on the lower line
When operating macro bus: "macro name" on the upper line, "input source name" on the lower line
4 PGM/A bus crosspoint buttons (1 to 16), PST/B bus crosspoint buttons (1 to 16)
Selects the video signals of the PGM/A bus and PST/B bus.
Source can be selected using the <2nd PAGE>/<3rd PAGE> button. (Maximum of 64) (page 10)
f Bus mode can be selected from the <CONF> button on the top menu → [OPERATE] → [Transition] tab → [Bus Mode] column → [Bus Mode].
5 <BUS SHFT> button
Press the <AUX 1/2> to <AUX 15/16>/<KEY1 F/S> to <KEY4 F/S>/<VMEM F/S>/<UTIL 1/2>/<DSK1 F/S> to <DSK4 F/S> buttons while holding
down the <BUS SHFT> button to switch the bus selection applications. For the <AUX 1/2> to <AUX 15/16> buttons, the bus selection applications
can be switched even when the selected button is pressed again.
Example) <KEY1 F/S> button
When only the <KEY1 F/S> button is pressed, the KEY bus crosspoint buttons are switched to the source selector buttons of the KEY1 fill bus.
When the <KEY1 F/S> button is pressed while the <BUS SHFT> button is held down, the KEY bus crosspoint buttons are switched to the source
selector buttons of the KEY1 source bus.
6 <2nd PAGE>/<3rd PAGE> buttons
Switch the page to select the source with the KEY bus crosspoint buttons, PGM/A bus crosspoint buttons, or PST/B bus crosspoint buttons.
f The pages of the buses included in the corresponding ME can be switched at once. To switch pages at individual buses, assign the <2nd
PAGE>/<3rd PAGE> button to the KEY bus crosspoint buttons, PGM/A bus crosspoint buttons, and the PST/B bus crosspoint buttons.
<2nd PAGE> button
Off
Lit
Off
Lit
7 <IMAG> button
Enables/disables image effects (paint, mono colors, mosaics, defocusing, etc.) to be added to images selected at the PGM/A bus and PST/B bus.
f The setting to enable/disable image effects to be added to images selected in the KEY bus can be made from the <ME1>/<ME2> button on the top
menu → [IMAGE] → [Key1]/[Key2] tab → [Mosaic/Defocus] column.
8 Bus tally
Indicates the output status of the buses. The buses that comprise the on-air tallies will light up.
Multi-selection panel area
1 Mode selection button
Switches functions that can be operated on the multi-selection panel.
<BKGD WIPE> button
<SHOT MEM> button
<EVT MEM> button
10
Switches to the source selector buttons for the utility 1 bus/utility 2 bus that can be inserted to background wipe borders
and key edges.
Switches to the start button to play back the macro memory assigned to the KEY bus crosspoint buttons. The
assignment can be made from the <MEM> button on the top menu → [MACRO] → [XPT Assign] tab.
Switches to the source selector buttons for the DSK fill buses or DSK source buses.
f If you select key fill signal or key source signal using the KEY bus crosspoint buttons, the signals are linked and
another signal is automatically selected. The unit's linking operation has two modes. The mode setting can be made
from the <CONF> button on the top menu → [SOURCE LINK] → [Key Assign] tab → [Master/Slave].
Button status
1
2
Selects background wipe preset.
Registers/recalls/deletes register memories of the shot memory.
Recalls register memories of the event memory. This button is also used to select register memories during EMEM-LINK
transition.
f Registration/editing are performed using the menu.
<3rd PAGE> button
Off
Off
Lit
Lit
STILL1 OP
4-1 4-2 4-3
4-4 4-5 4-6
4-7 4-8 4-9
RECALL
STORE
DEL
Displayed page
First page
Second page
Third page
Fourth page