Robland Z-3200 Manual
  1. Manuals
  2. Brands
  3. Robland Manuals
  4. Power Tool
  5. Z-3200
  6. Manual

Robland Z-3200 Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Index
General information
Important instructions when ordering spare parts
Attention
Safety and maintenance instructions
Danger list
Operating instructions
Normal and prohibited use
Explanation of accoustic and dust emission levels
Technical data
Transportation of the machine
Electrical connection
Mounting of the sliding table
Starting up the machine
Changing main sawblade and scorer sawblade
Use and adjustment of the riving knife
Lower sawblade cover
Height setting of main saw and scorer sawblade
Tilting of the saw unit
Lateral adjustment of the scorer blade
Operating the sliding table
Maintenance and lubrication of the sliding table
Mounting of the cross-cut table
Mounting of the 90° cross-cut fence
Calibration of the scale on the cross-cut fence
Mitre fence
Use of the parallel fence
Calibration of the scale on the parallel fence
Mounting of the roller support
Overhead sawguard
R.P.M. indicator lights
Belt tension and speed changing
Maintenance of the machine
Problems : causes and solutions
Option A5216: Retro-fit digital read-out for parallel fence
Option A5218: Digital read out for cruss cut fence
Electrical components spares list and order numbers
Electrical diagrams
Exploded views
Z3200 10-V1011
– Deutsch
2
3
3
3
3
4
5
6
7
8
9
10
10
11
12
12
13
13
14
14
15
16
16
17
18
18
19
19
20
20
21
22
22
23
25
26
51
55
1
– English

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Z-3200 and is the answer not in the manual?

Questions and answers

Related Manuals for Robland Z-3200

Summary of Contents for Robland Z-3200

  • Page 1 Index General information Important instructions when ordering spare parts Attention Safety and maintenance instructions Danger list Operating instructions Normal and prohibited use Explanation of accoustic and dust emission levels Technical data Transportation of the machine Electrical connection Mounting of the sliding table Starting up the machine Changing main sawblade and scorer sawblade Use and adjustment of the riving knife...

  • Page 2: General Information

    General information Important instructions when ordering spare parts Name and address of manufacturer NV WERKHUIZEN LANDUYT Kolvestraat 44 8000 Brugge Always mention the following items on your order : BELGIE Type of machine Serial number from manual Part number and quantity Your reference and correct phone and fax number Attention Working with woodworking machines can be extremely dangerous if the safety instructions are not...

  • Page 3: Normal And Prohibited Use

    Operating instructions Normal and prohibited use The following recommendations for safe working procedures are given as an example, on top of all The panel saw is designed for the following work and is equipped with protective devices for information characteristic of this machine. these processes only.

  • Page 4: Technical Data

    Technical Data Explanation of accoustic levels The values given are the emission levels; these are not necessarily the levels at which the operator Voltage 220 - 380 - 220 mono can work safely. Motors three phase 4-5,5, Option 7,5 Although there is a link between the emission values and the exposition level, it cannot be used in a Saw diameter min.-max.

  • Page 5: Transportation Of The Machine

    Transportation of the machine Electrical connection (Fig.1-2) (Fig.3-4) You will receive the machine in a crate made of heavy duty particle board panels, which can be easily The electrical connection must be carried out by a qualified electrician who is able to calculate exactly recycled.

  • Page 6: Mounting Of The Sliding Table

    Mounting of the sliding table Changing main sawblade (Fig.5) and scorer sawblade (Fig.7-8) The position of the sliding table relative to the machine is factory set and needs no further adjustments. Simply put the table onto the frame with the two lateral adjustment bolts (1) in the two lugs placed at Warning : Before changing sawblades always turn off the main switch.

  • Page 7: Use And Adjustment Of The Riving Knife

    Use and adjustment Height setting of main sawblade of the riving knife and scorer sawblade (Fig.10) (Fig.11) The machine is equipped with two riving knives for the use of sawblades from 250 to 300 mm and 350 Main sawblade height setting is done by turning the handwheel (1). After the sawblade is set at the to 400 mm.
  • Page 8 Lateral adjustment of the scoring blade (Fig.13-14) Each time the main sawblade is replaced by a new one, or even a newly sharpened sawblade, the scorer has to be adjusted to match the main sawblade teeth width. It is very important that this is done in the correct way to ensure a clean cut, free of splintering.
  • Page 9 Mounting of the cross-cut table Calibration of the scale (Fig.17) on the cross-cut fence (Fig.19-20-21) The cross-cut table can be slid from the back to the center of the sliding table via the flat bar on the side of the sliding table. Each time a new sawblade is put onto the machine the scales have to be calibrated.

  • Page 10: Mitre Fence

    Mitre fence Calibration of the scale on (fig.22) the parallel fence (fig.24) The flat T-nut which holds the vertical rod of the wood clamp is factory set and has to stay in its position to make the angle scale correspond. To set the required angle : unlock the rod (1) and the auto-release handle (2).
  • Page 11 Overhead sawguard Belt tension and speed changing (Fig.26-27) (Fig.29-30) According norms and applicable prescriptions, the sawguard always should be positioned, just maiN saWbelt : allowing the passing of the wood or work pieces. Always choose the speed accordingly the sawblade diameter and never exceed the maximum The adjustment of height can be done with the handle (1 and 2), using the previously adapted allowed cutting speed for carbide tipped sawblades of 100 m/sec.

  • Page 12: Maintenance Of The Machine

    If you cannot solve the problem yourself or you do not find your problem in this list, please contact your 0,5 - 1mm max Robland dealer. – English – Deutsch Z3200 10-V1011 –...
  • Page 13 Option A5218: Put the digital read-out onto the parallel fence support block using the 2 holes already drilled. On older machines these 2 holes need to be drilled. Now put the alu profile holding the magnetic strip onto the saw table at 1 mm below the table’s front Digital Flip stop on the cross-cut fence edge.

  • Page 14: Electrical Components Spares List

    Electrical components spares list Order n° Main switch N 8443 F1-2-3 Fuse 10x38 mm 4-5,5KW 380V = 16A N 8537 4KW 220 3ph = 16A N 8537 7,5KW 380V = 25A N 8542 5,5KW 220 3ph = 25A N 8542 7,5KW 220 3ph = 40A Fuse primary 10x38 mm 1A...

Table of Contents

Save PDF