Aiphone IX-DV Operation Manual page 55

4
Settings and Adjustments
Entry
Ringback Tone
Call Timeout *1
Ringback Tone Count
[time(s)]
*1 Indicates a required field. The settings should be entered. Retain the default values, unless a change is necessary.
Note
• When calling a VoIP Phone, this will be the shorter time of the time set for "Call Timeout" and the call duration set on the IP-
PBX.
Description
Configure the calling tone heard from this
station when an outgoing call is made.
Configure the call timer for calls.
This item lets you define the number of rings
for the calling tone.
Configuring the device on a PC
Settings
• None
• Call Pattern 1
• Call Pattern 2
• Call Pattern 3
• Call Pattern 4
• Call Pattern 5
• Call Pattern 6
• Tremolo Sound
• Busy Response Tone
• On Hold
• Operation Sound
• Error
• Pre Tone 1
• Pre Tone 2
• Pre Tone 3
• Communication End
Pretone
• Call Queue Notification
• Waiting Reply Tone
• Select from the audio
sources registered in
"Custom Sound Registry
(→page 52)".
• 10 - 600 sec: Select when
setting a value from 10 to
600 sec (by 1 sec).
• Infinite: Outgoing call
continues until the recipient
answers.
• 1-20 rings
• Infinite: The calling tone will
continue for the amount of
time configured in "Call
Timeout."
55
Default values
Call Button: Call
Pattern 1
Option Input 1: Call
Pattern 2
Option Input 2: Call
Pattern 3
Option Input 3: Call
Pattern 4
Option Input 4: Call
Pattern 5
Option Input 5: Call
Pattern 6
Option Input 6:
Tremolo Sound
60sec
Infinite