Accessory Connections; Radio Receiver (Typical) - Viking Access Systems E-4 Installation Instructions And Safety Information

!
Cable use in Class 2 circuit to an external device shall be type CL2, CL2P, CL2R, CL2X or
other cable with equivalent or better electrical, mechanical, and flammability ratings.
Radio Receiver
Speed Speed
Normal Normal
Max Max Min Min
Close Close Stop Stop Open Open
Center Center
Siren Siren
Loop Loop
+ +
Aux. Aux. Magnetic Lock Magnetic Lock Guard Station Guard Station Loop Connector Loop Connector
Pwr Pwr
+ - + -
Radio Station Radio Station
! TECHNICAL TIP:
For more information regarding
accessory connections and terminal
functions, refer to "Appendix (A)" on pages
37-38.
See "Appendix (B)" on page 39 for
connecting common radio receiver models.
VIKING TECHNICAL SUPPORT 1.800.908.0884
AC AC
AC AC
+ +
Bat Bat
- -
+ +
DC IN DC IN
- -
4A 4A 15A 15A
Overlap Overlap ODS ODS Timer Timer
3 3
6 6 0 0 100 100 0 0 60 60 Off Off
Master Master
Limit Open Limit Open
Limit Close Limit Close
ReOpen ReOpen UL UL Radio Radio
Slave Slave
Sens Sens Sens Sens Rec. Rec.
Power Power
Limit Open Limit Open
Low Bat Low Bat
Limit Close Limit Close
Radio Station Radio Station
Master Master Slave Slave
N.O.
COM

ACCESSORY CONNECTIONS

Open-Stop-Close
1. By having the radio receiver connected as
illustrated, every command of the radio
transmitter will control the gate as follows:
Every command of the radio transmitter will
control the gate as follows:
a. First command opens the gate,
b. Second command stops the gate and
c. Third command closes the gate
d. Any subsequent commands will continue
in the same order to control the gate.
+
For maximum reception range:
-
antenna to the top of the gate column.
Locate the radio
2 7