Page 2
(Front Inlet Version Shown) SIDE VIEW (Less Endcap) ARCHITECTURAL ENGINEER SUGGESTED SPECIFICATIONS CAF-12 Series Heating Element Construction Heating element to be heavy duty, corrosion resistant, stainless steel sheath, enclosing a nickel chromium element imbedded in compacted mineral insulation. Aluminum fins are Heaters shall be 12”...
Page 3
CCAS12 SERIES Architectural Slope Top Heater Specification Guide Sample Specifications Logic Available Voltages Length Weight CCAS12 Cat. No. Watts 1 Phase 3 Phase (in.) (lbs.) Series *Bottom 2’ 1500W 208V/1P White Built-in SP tamperproof Finished Inlet Length hydraulic thermostat painted Standard Density 750 w/ft.