D - Warranty - Hanna Instruments HI 98194 Instruction Manual

APPENDIX D - WARRANTY
All HANNA Instruments ® meters are guaranteed for two years (sensors,
electrodes and probes for six months) against defects in workmanship and
materials when used for their intended purpose and maintained according to
instructions.
This warranty is limited to repair or replacement free of charge. Damages due to
accidents, misuse, tampering or lack of prescribed maintenance are not covered.
If service is required, contact the dealer from whom you purchased the instrument.
If under warranty, report the model number, date of purchase, serial number
and the nature of the problem.
If the repair is not covered by the warranty, you will be notified of the charges
incurred.
If the instrument is to be returned to HANNA Instruments
Returned Goods Authorization number from the Technical Service department
and then send it with shipping costs prepaid.
When shipping any instrument, make sure it is properly packed for complete
protection.
®
, first obtain a
70
Recommendations for Users
Before using this product, make sure that it is entirely suitable for the environment in which it is used.
Operation of this instrument in residential areas could cause unacceptable interferences to radio and
TV equipment, requiring the operator to take all necessary steps to correct interferences. The glass bulb
at the end of the electrode is sensitive to electrostatic discharges. Avoid touching this glass bulb at all
time. To maintain the EMC performance of equipment, the recommended cables noted in the instruction
manual must be used. Any variation introduced by the user to the supplied equipment may degrade the
instruments' EMC performance. To avoid electrical shock, do not use this instrument when voltage at
the measurement surface exceed 24 Vac or 60 Vdc. To avoid damage or burns, do not perform any
measurement in microwave ovens.
71