Bluetooth ® Programming And Operation; Pairing A Mobile Device With A Ct Thermostat - Dometic 3316420 Series Operating Instructions Manual

BLUETOOTH
A.

Pairing A Mobile Device With A CT Thermostat

Before you begin, ensure you are standing within 3' (1 m) of the CT thermostat you wish to pair
your mobile device with. Do not touch the CT thermostat for 15 seconds to ensure the backlight is
off. Confirm the Bluetooth

If the Bluetooth
nect the other mobile device in order to connect to this CT thermostat.
If the Bluetooth
(after 5 days of system inactivity). Press any button to wake the Bluetooth
the icon is blinking slowly.
1. Open the Dometic Climate Control App on your mobile device and go to the pair management
screen. If no CT thermostats are paired with the mobile device this will be indicated with a
pop-up. Press OK the clear the pop-up and display the Pair Management screen.
a. If you already have CT thermostats paired with the mobile device the app will attempt to
connect to the last used thermostat or the default thermostat (see "C. Setting/Unsetting
The Default Device" on page 15). Press Cancel while connecting is in progress to
show the Pair Management screen
b. If a paired thermostat is connected, the main screen displays. Select the Settings menu
and then press Disconnect to show the Pair Management screen.
2. Press Add New Connection. See FIG. 6.
PROGRAMMING AND OPERATION
®
icon is blinking slowly (flashes at 2 second intervals).
®
icon is illuminated, this device is already connected to an app. Discon-
®
icon is not visible the Bluetooth
®
FIG. 6
radio may have gone to sleep to conserve power
®
7
system and ensure
®