Table of Contents
Advertisement
Option Installation
Activating +LM-P Audio Loudness Meter Option on OGCP-9000 Remote Control Panel
OPT-SW-LM-MS (V2.9)
Each Control Panel running the Audio Loudness Meter option must have the
Audio Loudness Meter licensable feature installed and activated. Install and
activate the feature as described below.
Note:
OGCP-9000 Remote Control Panels using the current version of option
+LM-P require that the control panel has a software build that supports this
option.
The control panel must be loaded with Processor Version 1012 or greater
before proceeding. From the Cobalt Digital Inc. web site, go to Support >
Firmware to download the current firmware, as well as instructions.
Note:
In performing this procedure, you will need to contact Cobalt Digital Inc. to
receive the feature key string for your Control Panel if not already done. Each
Control Panel has a unique feature key string. If it is not convenient to contact
us at this time, this procedure can be deferred until convenient.
On the Control Panel keypad, press
1.
0 This Control Panel
Using any knob or the
2.
Note the
Hardware ID
3.
Digital and provide this number to receive your feature key. You will be
given a 10-digit decimal string that is your feature key.
Note:
• If the string contains leading zeros, these must also be entered. String must
be 10 digits.
• If the string is mis-entered, the entered string value appears in red. Press
Cancel and re-enter the string.
Enter the 10-digit string using the Control Panel numeric keypad, and
4.
then press
Enter
feature acknowledgement is displayed as shown in the example below.
Press
Select Device
5.
and then displays the Audio Loudness Meter screen.
Repeat for additional Control Panels as required.
6.
AUDIO LOUDNESS METER OPTION (+LM-C, +LM-P) MANUAL SUPPLEMENT
Activating Audio Loudness Meter Feature Keys
.
Select Submenu
now displayed on the Control Panel. Call Cobalt
. After pressing the Enter key, the correct entry and
Loudness Meter
4144600267
. The Control Panel now saves the changes, restarts,
and select
Select Device
key, select
Licensed Features
.
2-3
Advertisement
Table of Contents
