4.3 Advanced Settings
ADVANCED SETTINGS
Factory Reset
Load Diversion
WiFi Connection
General Info
RF Channel Selection
Update Firmware
4.3.1 Factory Reset
The factory reset function shoul only be used if strictly necessary. and should NEVER be carried out by anyone
without knowledge of how to re-commission the system correctly. It is not possible to use the system without
commissioning, and all commissioning settings will be cleared by a factory reset.
Factory Reset in Progress
Do not disconnect the system
Please Wait
DO NOT FACTORY RESET THE FREE-E UNLESS YOU ARE QUALIFIED TO RE-COMMISSION IT!
Factory resetting the Free-E will remove all configurations and will not allow any functions to be carried
!
out until the commissioning procedure is complete.
4.3.2 Load Diversion
The Load Diversion function is a test/diagnostic function which allows the Free-E unit to be driven to a particular
output state, independent of the Free-E Meter readings.
This option allows the unit to be driven ON between 0 and 100 % (if a 3kW load is connected at the output this will
be 0 to 3kW) in roughly 1% steps.
This is not a user function. It is useful for fault finding as the Free-E variable output, L1 ,can be driven ON even
though there is no nett export power being measured by the Free-E Meter.
4.3.3 WiFi Connection
For information on connecting the Free-E to a WiFi network, see appendix 3.
4.3.4 General Info
The General Info option allows you to access and view information such as the software version (Version), the
device's serial number (Serial n*), the input voltage (Input V), the grid current (Grid I), the supply frequency
(Frequency), the device current being measured (Current) and the output in watts (Output).
General Info
Version: 0.1
Serial n*: 1015220002
Input V: 0.0V
Grid I: 4.49A
Frequency: 0.5Hz
Current: 0.00A
Output: 0W 0%
Dimplex
R
Millbrook House, Grange Drive, Hedge End, Southampton SO30 2DF
ENTER
Press Enter Button
Factory Reset
Are you sure you want to
reset the system?
WARNING:
This change is permanent
ABORT
OK
9
0844 879 3587
dimplex.co.uk | gdcgroup.co.uk