Table of Contents
Advertisement
Action
1 Turn the phone on (by pressing and holding
before you begin to charge the battery.
Note: If the battery is completely discharged, the
phone may not turn on. If this happens, turn the
phone on after you connect the adapter.
2 Plug the travel charger into the appropriate
electrical outlet.
3 Plug the other end of
the travel charger into
your phone, as shown.
Note: If the battery is
not installed properly,
the phone displays
Charging Impossible
4 When your phone indicates that it is fully charged
( Charge Completed ), remove the charger.
Notes:
• When you charge the battery, the battery level
indicator blinks and the phone displays Charging .
• Charging stops if you place or receive a call. However,
if the battery isn't sufficiently charged, the keypad will
not function. The phone operates only if the battery is
charged enough to use the keypad.
• If you charge the battery completely, but the phone
does not operate longer than 30 minutes and displays
.
O
)
15
Advertisement
Table of Contents
