Table of Contents
Advertisement
Battery Installation Instructions
To Insert Battery
1
Squeeze the two bottom side battery latches in and slide the
battery tray down and out of the Communicator. Refer to
Figure 1.
2
Place the battery pack into the tray with the arrows facing
upward. Refer to Figure 2.
3
Slide the battery tray into the Communicator until it snaps
into place.
To Remove Battery
1
Squeeze the two bottom side battery latches in and slide the
battery tray down and out of the Communicator. Refer to
Figure 1.
2
Remove the battery pack from the tray by pushing downward
on the battery and pivoting it away from the tray until the
hook-latch on the battery clears the tray. Refer to Figure 3.
Figure 1.
Battery Tray
Battery
Latch
Introduction
Figure 2.
Insert Battery Pack
Figure 3.
Remove Battery Pack
9
Advertisement
Table of Contents
