Assembly Procedure; Installing The Projector In The Frame - Panasonic ET-RFD32 Installation Manual

INSTALLING THE PROJECTOR IN THE FRAME

Before installing of the frame,
remove the handles on the front and
the back of the projector.
screw (M10x35)
Place the frame on the projector so that it is
aligned with the screw hole positions.
(Make sure that the forward/back direction is
correct when installing. If the direction is reversed,
the hole positions will not match up.)
Please make sure to use ONLY the
correspondent screw holes when
at washers (M10)
installing a projector!
Secure the projector to the frame using the six
screws (M10x35) and the twelve at washers (M10).
Do not forget to use the washers as they are
responsible for the galvanic isolation.
Torque: 20 ± 1 Nm
4.