Assembly Procedure - Panasonic TY-ST55PE9 Operating Instructions Manual

Assembly Procedure

1. Preparing the display
Installation must be carried out by at least two
people.
Spreading out a soft cloth, etc., place the display
with the screen facing down.
● Be careful not to damage the display screen, for
example, by dragging it.
● When placing the display with the screen facing down,
or lifting it up, never hold or put pressure on the LCD
screen. The LCD screen may be damaged.
2. Attaching the pedestal tube
1) Place the pedestal tubes
back of the display.
● Locate the nuts inside.
(The side with the nuts comes to the downside.)
● Use the hole position where the distance between
the base and the bottom surface of the display is the
smallest when the base is attached.
14
to fit the holes at the
The side with the nuts comes
to the downside.
Protective sheet
Pedestal tube
Nut
Pedestal tube
Bottom surface of the display
Base