REMOTE PANEL ID ● Necessity of ID When connecting multiple remote panels, it is necessary to allocate different ID to each remote panel so that signal interference does not occur. The ID for factory shipment is set as follows. Case of 1 remote panel 2 remote panels 3 remote panels...
Page 7
REMOTE PANEL ID 2. When releasing the simultaneous press, the current ID is displayed. (ID: 1 to 3). ID:01 ID:02 ID:03 3. To change the ID number, Press "+" or "-" switch of the panel. Select the ID not to overlap among remote panels. ID:01 ID:02 ID:03...