Placard Installation Instructions - TPR UniLock Owner & User Manual

INSTALLATION

Placard Installation Instructions

Placard Installation Instructions
• Owner/Users are responsible for the installation and placement of product
• Owner/Users are responsible for the installation and placement of product
• Owner/Users are responsible for the installation and placement of product
placards.
placards.
placards.
• Make sure placard is in plain view of dock leveler and/or vehicle restraint
• Make sure placard is in plain view of dock leveler and/or vehicle restraint
operations.
• Make sure placard is in plain view of dock leveler and/or vehicle restraint
operations.
operations.
• Suggested placement of placard is near control box attached to electrical
• Suggested placement of placard is near control box attached to electrical
conduit by using nylon cable tie. If there is no control box present, mount placard
• Suggested placement of placard is near control box attached to electrical
conduit by using nylon tie. If there is no control box present, mount placard
on wall to the immediate left of leveler at eye level.
conduit by using nylon tie. If there is no control box present, mount placard
on wall to the immediate left of leveler at eye level.
on wall to the immediate left of leveler at eye level.
Nylon Tie
C
Nylon Tie
Conduit
Conduit
D
A - Control Box
18
Control Box
A
Control Box
A
C
D
B - Placard
Figure 12
Placard
(Placard placement shown
B
B
as example only.)
Placard
(Placard placement
shown as reference
(Placard placement
only.)
shown as reference
only.)
C - Nylon Cable Tie D - Conduit
4111-0072 — Dec. 2018
© 2018 Systems, LLC