Table of Contents
Advertisement
INSTALLATION
Installation Precautions
Post safety warnings and barricade the work
area at dock level and ground level to prevent
unauthorized use of the dock leveler before
installation has been completed.
DO NOT grind or weld if hydraulic fluid or other
flammable liquid is present on the surface to be
ground or welded.
DO NOT grind or weld if uncontained hydraulic fluid
or other flammable liquid is present. Stray sparks
can ignite spills or leaks near the work area. Always
clean up the oil leaks and spills before proceeding
with grinding or welding.
Always keep a fire extinguisher of the proper type
nearby when grinding or welding.
Only trained installation professionals with the
proper equipment should install this product.
DO NOT connect the vehicle restraint electrical
wiring and ground connections until all welding has
been completed.
DO NOT ground welding equipment to any electrical
components of the vehicle restraint. Always ground
welding equipment to the vehicle restraint base,
NEVER to the moving components.
Failure to follow these instructions may damage the
motor, wiring, and/or control panel.
10
4111-0072 — Dec. 2018
© 2018 Systems, LLC
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the TPR UniLock and is the answer not in the manual?
Questions and answers
Manual unlock
To manually unlock the TPR UniLock, the dock operator must press the RELEASE button on the controller inside the loading dock. This action causes the hook to rotate out past the anchor points and drop down into the housing, allowing the trailer to be released.
This answer is automatically generated