Table of Contents
Advertisement
Turbo Timer (Optional)
This option will keep the engine running to allow the vehicle's turbo to properly cool
down before shutting the engine off.
To engage the Turbo Timer feature:
1.
With the vehicle running via the ignition key and your foot off of the
brake pedal.
2.
Engage the vehicle's parking brake.
3.
The vehicle's parking lights will turn on to verify the Turbo Timer
feature has been activated.
4.
Turn the ignition key OFF, the vehicle will continue to run until the pre-
programmed time has elapsed (1, 3, or 5 minutes)
To disengage the turbo timer feature, press the vehicle's brake pedal.
Operating the 2 / 4 Hour Start Up Timer Mode
The system has the ability to start the vehicle every 2 or 3 hours for a 48 hour period.
This feature is especially useful in cold climates where the only means to keep the
engine and engine fluids warm is to periodically start the engine. The default setting
is 4 hours.
WARNING!
Be certain that the vehicle is outdoors before using this or any remote starting
device. A running engine produces dangerous carbon monoxide fumes which can be
harmful or fatal if prolonged exposure occurs. DO NOT remote start the vehicle if it is
garaged.
To begin the 2 / 4 hour start up timer mode:
1.
Turn the vehicle's ignition ON then OFF.
2.
Press the
To exit the 2 / 4 hour start up timer mode:
1.
Turn the vehicle's Ignition ON.
OR
2.
Press the vehicle's brake pedal while the engine is running.
2018 Voxx Electronics Corporation. All rights reserved.
button 4 times, the system will;
a.
When set for 2 Hour (default) - chirp 2 times and flash the
parking lights 2 times.
b.
When set for 4 Hour - chirp 4 time and flash the parking
lights 4 times.
9
Hide quick links:
Advertisement
Table of Contents
