Operating The Daily Start Timer; Temperature Start Mode - Prestige PE2LCDZ Owner's Manual

Operating the Daily Start Timer

The system has the ability to start your vehicle based on a 24-hour countdown timer.
This feature requires a two-part activation sequence. From the remote, while in range
of the vehicle, pressing both the
countdown timer (the vehicle will start 24 hours from this time). Next, When you are
finished operating the vehicle for the day, perform the following steps to complete the
process.
1. Turn the ignition ON/OFF (vehicle must be disarmed).
2. Within 10 seconds, while pressing the brake, press and release the
button twice.
3. The vehicle will emit 2 chirps and flash the parking lights 4 times.

Temperature Start Mode

The system has the ability to start the vehicle if the temperature drops below a preset
temperature threshold. Once activated, the system will only start the vehicle one time
based on the temperature setting and will be cancelled if the vehicle is started with the
key or remote started by the transmitter. Temperature is read from the module, located
below the dashboard in most instances, and the vehicle's interior temperature may
vary from the ambient temperature.
1. The vehicle must be armed.
2. Press and release both the
Note: This feature is defaulted OFF and must be set in option programming.
10
OPT
& buttons together will activate the 24 hour
OPT
& buttons together.
APSRS LCDZ Owners revA