Page 1
Owner’s Guide For Models: APS997Z Security / Remote Start Syatem IMPORTANT NOTE: The operation of the Security and Convenience System as described in this manual is...
Using Your Remote Control Arming the Security System button. The from the vehicle. Disarming the Security System To disarm the system press the Two Stage Door Unlock (Optional) doors. Activating the Trunk Release Feature (Optional) button for 3 Activating the AUX Ch. 4-7 Output (Optional) Using the Personal Protection Alarm (Panic) button for 3 seconds to activate the personal protection button on the...
Page 3
Bypassing The Shock Sensor button. The system will beep button 2 times within 5 seconds. button 3 times within 5 seconds. City Mode button 4 times within 10 seconds. User Selectable LED dealer for assistance.
Page 4
Valet Mode Manually Overriding the Security System start and operate the vehicle normally. Stand Alone Valet Override (Optional) is necessary, since you will need the ability to operate your vehicle if the transmitter autorized dealer.
Page 5
Custom Code Valet Override (Optional) Start with the alarm disarmed. of the chosen Custom Code.
Using Your Remote Starter Remote Starting Your Vehicle To activate the remote start function, press and release the button 2 times within seconds between each start attempt. Remote Start Shutdown Entering the Vehicle while it is Running via Remote Vehicle Start position.
Page 7
Remote Start Ready Mode must be enabled if your vehicle is equipped with a manual transmission. Remote Start Ready Mode - Manual Transmission Vehicles Only button to ready mode is set. To Enter & Exit the Vehicle while (Manual Transmission) Remote Start Ready Mode is already active without cancelling Remote Start Ready Mode.
Page 8
Cancelling Remote Start Ready Mode - Manual Transmission Vehicles Only Using the “Quick-stop” Feature To engage Quick Stop: button 2 stop is entered. To engage Quick Stop - Manual Transmission Vehicles: button to activate remote start. button. Note:...
Page 9
Turbo Timer (Optional) To engage the Turbo Timer feature: feature has been activated. To disengage the turbo timer feature, press the vehicle’s brake pedal. Operating the 2 / 4 Hour Start Up Timer Mode The system has the ability to start the vehicle every 2 or 3 hours for a 48 hour period. is 4 hours.
Page 10
Operating the Daily Start Timer process. button twice. Temperature Start Mode The system has the ability to start the vehicle if the temperature drops below a preset vary from the ambient temperature. The vehicle must be armed.
Status LED, Light Flashes, and Siren/Horn Indications Status LED Flash Indications LED Flashes Function Siren/Horn Chirp Indications Chirps Function Parking Light Flash Indications Flashes Function Remote Start Shutdown Diagnostics Parking Light Flashes Shutdown Zone...
Additional 2-Way LCD Remote Control Functions Additional Features of the Optional 2 Way LCD Remote Control Display Illumination button for 1 second. The display will illuminate for 5 seconds. Melody / Vibration Mode To have the remote control vibrate or play a melody tone each time it receives a response from the vehicle press and hold then press and release .
Adjusting the Clock and Timer Settings for 5 seconds to access the function menu, once you have accessed the feature menu press and release to increase or to decrease to increase or to decrease to increase or to decrease to increase or to decrease to increase or to decrease...
Replacing Remote Control Batteries 5 Button Remote Control - Model 185SP control. batteries and replace with a new battery. 4. Test operation of the remote control. 2 Way LCD Remote Control - Model 18LCDSP battery, and replace with a new battery. Test operation of the remote control.
Need help?
Do you have a question about the APS997Z and is the answer not in the manual?
Questions and answers