Table of Contents
Advertisement
• Speak clearly and natural.
• The person who will use the phone should record the name.
The phone does not recognize the name if the voice sounds
differently.
• Avoid too long or too short name. It is recommended to con-
tain 2 to 5 syllables.
• Voice dial feature is available only in CDMA mode.
• If this feature does not work properly, erase the name, and
record with another name.
• It is recommended to practice several times to obtain best
result.
• You can record up to 20 names. If you record more than 20,
the phone announces 'Memory is full'.
Review/Erase
This option allows you to check or erase an individual voice
dial entry. A list of entries displays.
Press the digit key to select the desired entry, or press the
key to scan entries
When you select the desired entry, the recorded name plays
audibly.
If you want to erase the selected entry, press
42
Digital Cordless Telephone
MENU 5-2
key
Erase All
This option allows you to delete all voice dialing entries.
Press
key, when you asked to confirm. Otherwise,
press CLR or
key to exit the function without delet-
ing the voice dialing entries.
Set Active
Voice Dialing is always active once you have recorded a name
and have entered the associated phone number. To place a
call using Voice Dialing, simply press and hold
the idle mode and then say the name into the phone after you
hear the prompt.
You can also initiate a Voice Dialing call just by opening the
flip, when you select this option.
[ ] only: Enables Voice Dialing only by pressing and holding
key.
[ ]/Flip: Enables Voice Dialing by pressing and holding
key or by opening the flip.
MENU 5-3
MENU 5-4
key in
Digital Cordless Telephone
43
Advertisement
Table of Contents
