Assembly - Sears LIFESTULER SYSTEM 40 831.15931 Owner's Manual

Cross training system
Table of Contents

Advertisement

ASSEMBLY
Assembly
requires two people and will take about 4 hours. The following
tools (not Included)
are
required:
two 8" adjustable
wrenches,
a rubber
mallet,
a phillips
screwdriver
and a standard
screwdriver.
Grease
and a small bowl of soapy water are also required.
As you assemble the
cross training system, read each step and examine each drawing
carefully. Make sure that all parts
are oriented
as shown
In the drawings.
Refer to the PART IDENTIFICATION
(ID) CHART
accompa-
nying this owner's manual for help identifying the small parts used in assembly.
Due to the size and
weight of the cross training system, it should be assembled
in the place where it will be used. Place all
parts of the cross training system in a cleared area and remove the packing materials;
do not dispose
of the packing materials
until the cross training system is completely
assembled.
.
Press a 2" x 2" Outer Cap (36) onto each end
of the Stabilizer (73).
Insert two 5/16" x 2 3/4" Carriage
Bolts (35)
and a 5/16" x 2 1/2" Carriage
Bolt (22) up
through
the Stabilizer
(73).
Insert two 5/16" x 2 1/2" Carriage
Bolts (22) up
through the Base (69). Slide the-end
of the
Base over the two 5/16" x 2 3/4" Carriage
Bolts (35) in the Stabilizer
(73).
2. Slide the Rear Upright
(74) over the two
5/16" x 2 3/4" Carriage
Bolts (35) in the
Stabilizer
(73) and Base (69). Make sure that
the Rear Upright
is turned
so the pedal axles
are on the indicated
side. Attach the Rear
Upright with two 5/16" Nylock
Nuts (4). Do not
fully tighten the Nylock
Nuts yet.
3. Slide the end of the Brace (56) that has an
oblong hole in it over the 5/16" x 2 1/2"
Carriage
Bolt (22) in the Stabilizer
(73). Attach
the Brace with a 5/16" Nylock Nut (4). Do not
fully tighten the Nylock
Nut yet.
Attach the other end of the Brace (56) tothe
Rear Upright (74) with a 5/16" x 2 1/2 wBolt
(20), 5/16" Washer
(10) and 5/16" Nylock Nut
(4).
Tighten
all Nylock
Nuts used In assembly
steps 1-3.
36
i
22
35
36
//74
.._
Pedal axles
"_
must be on
_4
this side
2;
73

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Lifestyler system 40831.159310

Table of Contents