Table of Contents
Advertisement
4.4.5.2 SATA Drivers
Figure 4-4-5-2 : SATA Devices Settings
Chipset SATA
Enables or Disables the Chipset SATA Controller. The Chipset SATA controller
supports the 2 black internal SATA ports (up to 3Gb/s supported per port).
SATA Mode Selection
Determines how SATA controller(s) operate.
Aggressive LPM Support
Enable PCH to aggressively enter link power state.
Options for each SATA port :
Port 0/1
Enable or Disable SATA Port.
Spin up Device
If enabled for any of ports Staggerred Spin Up will be performed and only the
drives which have this option enabled will spin up at boot. Otherwise all drives
spin up at boot.
SATA Device Type
Identify the SATA port is connected to Solid State Drive or Hard Disk Drive.
©Vecow EMBC-2000 User Manual
BIOS SETUP
48
Advertisement
Table of Contents
