Seagate Scorpion 240 DDS-4 Installation Manual page 31

Scorpion 240 Autoloader Installation Manual
LED Code summary
The following table summarizes LED flash codes for the
Scorpion 240.
LED
Clean
Media
Drive
Action Meaning
ON (lit) Cleaning is required because the
drive has been operated for at least
25 hours (DDS-1 and DDS-2) or 50
hours (DDS-3 or DDS-4).
Flashing The internal error rate threshold has
Slowly been exceeded and cleaning is
required.
Flashing The cleaning cartridge in the drive
has exceeded its useful life.
Replace the old cleaning cartridge
with a new one.
ON (lit) A cartridge is inserted and is not
generating excessive errors.
Flashing The drive could not write the tape
correctly (a write error has
occurred). Use a Seagate-approved
cleaning cartridge to clean the drive.
ON (lit) The drive is reading or writing the
tape normally.
Flashing A hardware fault occurred.
Rapidly
A-29