Table of Contents
Advertisement
Press any key to exit the report mode automatically. Press "CLR" key to clear the count
memory.
4.4 Printing function
If the printer is connected to the machine, press and hold "PRT" key, "Print..." will be
displayed on the LCD (shown in the following figure) and the report will be printed. After
printing is completed, the Cube returns to its ready state.
4.5 Select accumulative counting
When you need an accumulative counting, press "ADD" key on the control panel and the
"ADD" will be displayed on the LCD. The machine will count on the basic of the original
number displayed on the LCD. After bill counting is finished, the number displayed on the
LCD is the sum of the multiple counts just completed. When accumulative pieces reach
999+1 or accumulative value reaches 999999+1, the count and/or value will be reset
to 0.
Mix
AED
PCS:
999
VAL:
999999
ADD
A
B:---
18
Print...
Mix
AED
PCS:
0
VAL:
0
ADD
A
B:---
4.6 Select batch counting
When you need a batch counting, press "BAT" key, when "100" is displayed on the preset
window, it shows the batch function has been turned on, the batch number is 100. Each
time when you press "BAT" key, 100, 50, 20, 10 and "---" will be displayed in turn
repeatedly. If the LCD displays "---", the batch function is disabled. You also can press or
hold "+1/+10" key to increase the batch number by 1 or 10 according to desire. The
batch number can be selected in the range of 1~200. After setting the batch number, put
the bills on the hopper and the machine will count automatically. When the unit reaches its
batch number, the machine will stop automatically.
5.
TIME SETTINGS OF REAL TIME
To adjust the time settings, enter Settings menu by pressing MENU key.
To enter into time face interface, press "ADD" key. It will display like below:
Time Set
Auto
:
Sleep Time:
Time Set:
Setting time
Auto:
Setting Auto/Manual mode
Sleep Time:
Setting sleep time (5 minutes, 10 minutes or off)
Click "CUR" key to select the option continuously.
Click "ADD" key to change the parameter.
When reach the Time Set option, press "ADD" to enter into time set interface, it will display
like below:
21:06 2015-04-03
Cassida CUBE compact value counter
ON
OFF
19
Advertisement
Table of Contents
