Table of Contents
Advertisement
About Care and Maintenance of the Print Heads
Care of the print heads is essential to ensuring optimal printing at all times. There are maintenance tasks that
should be performed daily and those that should be performed periodically.
Daily care and maintenance
Printing Tests and Normal Cleaning
Be sure to perform a printing test before and after daily operations. Also, perform this maintenance during
daily operations as needed.
P. 21, "Printing Tests and Normal Cleaning"
Periodic care and maintenance
P. 58, "Periodic Cleaning Maintenance"
Note: The print heads are components that wear out. Periodic replacement is required, with the fre-
quency of replacement depending on use. For information about purchasing replacements, contact
your authorized Roland DG Corp. dealer or visit our website (http://www.rolanddg.com/).
Disposing of Discharged Fluid
CHECK
DRAIN BOTTLE
1.
Empty the bottle by discarding the discharged fluid.
CHECK
DRAIN BOTTLE
Press [MENU].
MENU
SUB MENU
SUB MENU
MAINTENANCE
MAINTENANCE
DRAIN BOTTLE
Maintenance That Should Be Performed Daily
The drain bottle collects discharged fluid. Dispose of collected material
before the bottle becomes full. The message shown in the figure appears
when a certain amount of discharged fluid has collected in the bottle. Follow
the procedure below to discard the discharged fluid.
When the message shown in the figure appears, press
[ENTER].
Press [ ] several times until the screen shown on the left
appears.
Press [ ].
Press [ ] twice.
Press [ ], then [ ].
Press [ENTER].
Chapter 3 Maintenance
55
Advertisement
Table of Contents
