Whirlpool WWA-680 Service Manual page 7

TROUBLE INSPECTION INSPECTION INSPECTION
Operation of safety device
Start of spin-drying.
When the safety device works by abnormal swing of spin drum, machine works automatically to
stop Spin-Dry cycle and operates water supply valve to pour water into the Wash/Spin Tub and then starts
washing cycle for replacing washing clothes evenly.
After above operation has down twice, if safety device works again, machine will stop, and the number window
LED display abnormal code:
to indicate a problem.
• Open the Wash Lid and rearrange the clothes evenly around the Wash/Spin Tub.
• Close the Wash Lid and press the START/PAUSE button again.
f. Buzzing and rattling
Buzzing/rattling Is high water
INSPECTION INSPECTION
during water pressure (more
supply. than 4kg/cm
CAUSES
Safety device work.
Electric circuit
count operation of
safety device.
Automatic
adjustment or
load.
and begin blinking on and off at the same time and the electric buzzer sounds
Low
Screw of water valve is
loose.
2
)? Something in water valve.
High
Faucet open too far
REMEDY
Normal spin.
Electric circuit works to stop
spin when safety device
detects continuously three
times of abnormal swing of
spin drum.
Stop of Spin-Dry
Agitation of load (Rinsing
for 2 minutes).
Tighten screws.
Replace.
Adjust faucet
turning.
7
Water supply
WWA-680