Tuner; Listening To The Radio - Pioneer DEH-P5850MPH Operating Manual

Tuner

Listening to the radio

1 2 3 4
These are the basic steps necessary to operate
the radio. More advanced tuner operation is
explained starting on the next page.
Important
If you are using this unit in North, Central or
South America, reset the AM tuning step (see
Setting the AM tuning step on page 38).
1 Stereo (5) indicator
Shows when the selected frequency is
being broadcast in stereo.
2 LOC indicator
Shows when local seek tuning is on.
3 Preset number indicator
Shows which preset has been selected.
4 Band indicator
Shows which band the radio is tuned to, AM
or FM.
5 Frequency indicator
Shows the frequency to which the tuner is
tuned.
1 Press SOURCE to select the tuner.
Press SOURCE until you see Tuner displayed.
All manuals and user guides at all-guides.com
2
Press BAND until the desired band (FM1,
FM2, FM3 for FM or AM) is displayed.
3
c or d.
The frequencies move up or down step by
step.
4
5
c or d for about one second and release.
The tuner will scan the frequencies until a
broadcast strong enough for good reception is
found.
# You can cancel seek tuning by briefly pressing
c or d.
# If you press and hold c or d you can skip sta-
tions. Seek tuning starts as soon as you release
the button.
Black plate (11,1)
Press BAND to select a band.
To perform manual tuning, briefly press
To perform seek tuning, press and hold
<XRD7106-A/N>11
Section
04
11
En