Equalizer Curve Fine Adjustment - Pioneer KEH-P6900R Operation Manual

Audio Adjustment
3. Boost or attenuate the selected
band with the 5/∞ buttons.
The display shows "+6" – "–6".
Note:
• If you make adjustments when a curve other than "CUSTOM" is selected, the newly adjusted curve
will replace the previous adjusted curve. Then a new curve with "CUSTOM" appears on the display
while selecting the equalizer curve. (Refer to page 35.)

Equalizer Curve Fine Adjustment

You can adjust the center frequency and the Q factor (curve characteristics) of each cur-
rently selected curve band (EQ-LOW/MID/HIGH). Adjusted equalizer curve settings are
memorized in "CUSTOM".
Level (dB)
Center frequency
1. Press the AUDIO button for 2 seconds to select Equalizer Curve Fine
Adjustment.
2. Press the AUDIO button to
select the desired band for
adjustment.
3. Select the desired frequency
with the 2/3 buttons.
LOW: 40 + = 80 + = 100 + = 160 (Hz)
MID: 200 + = 500 + = 1K + = 2K (Hz)
HIGH: 3K + = 8K + = 10K + = 12K (Hz)
37
"CUSTOM"
Q=2W
Q=2N
Frequency (Hz)