Lcd Transmitter Battery Replacement - Scytek electronic 5100RS-22W Product Manual

Vehicle security system with remote start
Table of Contents

Advertisement

4. Turn off the ignition key.
5. Repeat steps 1-4 to add an additional 2-way transmitter.

LCD Transmitter Battery Replacement

Your Galaxy Remote Transmitter uses a 1.5 volt AAA alkaline battery, which will require
replacement in time. Depending on the amount of use, the battery may last up to six months
before it needs replacement. When the battery needs replacing, the system's operating range
will decrease, the LCD display will show only one of three bars in the battery icon, or the
display and sounds may suddenly stop and start as the battery voltage drops below minimum.
In order to change the battery, first slide the battery door locking pin to the side. Carefully
slide the battery cover downward until it is free. While replacing the battery make sure that
the positive and negative terminals are positioned correctly, then carefully reassemble the
transmitter case.
Galaxy 5100RS-2W - Page 5

Advertisement

Table of Contents
loading

This manual is also suitable for:

Galaxy 5100rs-2w

Table of Contents