Register Your Product Online Register Your NewAir Product Online Today! Take advantage of all the benefits product registration has to offer: Service and Support Diagnose troubleshooting and service issues faster and more accurately Recall Notifications Stay up to date for safety, system updates and recall notifications...
These words mean YOU CAN BE KILLED OR SERIOUSLY INJURED IF YOU DO NOT FOLLOW THE PROVIDED INSTRUCTIONS. All safety messages will tell you what the potential hazard is, how to reduce the chance of injury, and what can happen if the instructions are not followed. newair.com...
PREPARING YOUR ICE MAKER FOR USE IMPORTANT SAFETY TIPS WARNING: When using electrical appliances, basic safety precautions should be followed to reduce the risk of fire, electric shock and injury to persons or property. Read all instructions before using any appliance. 1.
Page 6
The wires in the main lead are colored in accordance with the following code: Green or green with a strip of yellow: Ground White: Neutral Black: Live To avoid a hazard due to the instability of the appliance, it must be placed on an even or flat surface. newair.com...
GETTING TO KNOW YOUR UNIT 1. Cover for water reservoir 2. Lid 3. Water separator pipe 4. Evaporator 5. Ice basket 6. Ice scoop 7. Control panel: easy to use, visible functions touch display setting: A. Add Water indicator B. Ice Full indicator C.
(ground) prong from the power cord. Any questions concerning the power and/or grounding should be asked to an electrician. 3. This appliance requires a standard 110V to 120V, 60Hz electrical wall outlet with a three-prong ground. newair.com...
Page 9
CLEANING AND MAINTAINING YOUR ICE MAKER WARNING: Before using your ice maker, it is strongly recommended to clean it thoroughly. After using your ice maker for a long time, we also suggest you clean your unit, especially the water separator pipe and water filters. 1.
Page 10
Because the water value prevents water from draining in the reservoir, plug in the unit (but do not start the unit) and remove the drain port cap at the back if you plan on draining all the water. Wait a few minutes for all of the water to flow out. newair.com...
USING YOUR ICE MAKER 1. Remove the cover of the water reservoir and pour potable water into the water reservoir. Be sure to keep the water level below the marked maximum FILL level. CAUTION: Replace the back cover at once to avoid foreign matter entering.
Page 12
6. Change the water in the water reservoir every twenty-four (24) hours to ensure you are using clean water. If the unit is not in use for a long time, drain all the water that is left in the water tank and the water reservoir. newair.com...
TROUBLESHOOTING Problem Possible Causes Solution Stop the ice maker, fill water from the top big water reservoir up to The “ADD WATER” Lack of water. the “FULL” mark, then press the indicator is on. “ON/OFF” button again to restart the unit. The “FULL ICE”...
● Partially or completely dismantled appliances ● Excess wear and rear by the user Replacement parts and/or units will be new, re-manufactured or refurbished and is subject to the manufacturer’s discretion. For technical support and warranty service, please email support@newairusa.com. newair.com...