Advertisement
You can run HELLO anytime
you want by moving to
~~~
HELLO.BA's position on the
Main Menu and pressing
[ENTER].
Loading a BASIC Program
You might want to load a pro-
—
gram back into BASIC so that
you can revise and edit it. To do
__
so, enter BASIC and press the
Load function key (CUD). BASIC
displays:
LOAD "
Type HELLO (ENTER). Press the
List key (CUD) and you see that
—
HELLO.BA is loaded into
BASIC.
Editing a BASIC Program
_ _ _ _
with TEXT
To edit a BASIC program, press
_
(ENTER) and, at BASIC'S "Ok"
prompt, type:
—-
EDIT (ENTER)
This command loads the BASIC
program into TEXT. You can
now edit the BASIC program,
just as you edit a TEXT file.
When finished editing, press
CEfiD, and the program is loaded
back into BASIC.
Learning More About BASIC
Many books are available in
computer stores that teach how
to program in BASIC. You can
use any of these books to learn
how to program and use the
Tandy 200 BASIC Reference
Guide to learn which BASIC
commands the Tandy 200 uses.
Chapter 8 Summary
BASIC
To erase BASIC memory: Type
NEW (ENTER).
To list a BASIC program:
Press (ED.
To run a BASIC program:
Press Q3D.
To save a BASIC program:
Press (~F3~); then enter a filename.
To load a BASIC program:
Press (ED; then enter a filename.
To edit a BASIC program:
Type EDIT (ENTER]. (Return to
BASIC by pressing CBD.)
Running BASIC Programs / 43
Advertisement
