Advertisement
Enter a filename using 6 or fewer
characters; for example, type
SEMINR [ENTER). The recorder
turns on, records, and then stops
automatically. We recommend
you store 2 or 3 copies of the
file.
To protect a file: Once you
have recorded a file on tape, you
may want to write-protect the
tape. To do so, remove the 2
notches on top of the tape:
With the notches removed, you
can load information from the
tape, but you cannot record
anything on it. If you ever want
to cancel this write-protection,
put some tape over the 2
notches.
To load a file: Rewind the tape
and press the PLAY button until
it locks. Set the volume between
4 and 6, for the CCR-81, or on
" P " , for the CCR-82. Press
CED, and TEXT prompts:
Load from:
In response to this prompt you
can simply press (ENTER) (to
load the next file) or enter a
specific filename, such as
SEMINR (ENTER) (to load the
specified file).
Type SEMINR (ENTER). TEXT
turns on the recorder and, when
it finds the SEMINR file,
displays the message:
Found: SEMINR.DO
When the above prompt disap-
pears, TEXT has finished loading
SEMINR.DO into RAM.
Deleting, Copying, and
Renaming a File
The Tandy 200 lets you delete,
copy, and rename any Tandy 200
file except the built-in program
files. (The built-in programs are
in read-only memory (ROM) and
cannot be altered.) To use these
functions, return to the Main
Menu.
To delete a file: Move to a
file's position on the Main Menu
and press the Kill key (CED). The
Main Menu gives you a chance
to reconsider by asking "Are you
sure? (Y/N)". Press CS if you
are sure and the file is deleted
from RAM.
To copy a file to another
bank: Move to a file's position
on the Main Menu, and press the
Copy key (CED). The Main Menu
asks for a "Destination Bank:".
Type the number of another
bank, and the file is copied.
Writing Notes and Letters / 11
Advertisement
