Advertisement
Connecting to the Telephone
Open the packet containing the
modem cable. Save the instruc-
tions for use later in this manual.
Connect the Tandy 200 to the
telephone in either of these ways.
(It makes no difference which
way you use.)
Set the DIR/ACP switch to DIR:
Enter TELCOM. TELCOM's
bottom line gives the meaning of
its function keys. As with the
other programs, you can use
(LABEL) to turn on and off this
display.
Find Call Stat Term
Menu
Setting TELCOM Parameters
TELCOM's top line gives its
currently-set parameters. Only 2
of them are important for
autodialing:
MI1ENN,0,10 pps
• The " M " tells TELCOM to
use the built-in modem. (You
must use the built-in modem
to autodial.)
• The "10 pps" tells TELCOM
to pulse dial at 10 pulses per
second.
If your display shows different
values for these 2 parameters,
press the Status function key
(CE2D) and enter the new value by
typing M7IlENN,O,10 pps
CENTER]. Then press CHD
CENTER) to see that you have set
the parameters correctly.
Autodialing Numbers
Press the Call function key (CE2D)
and you see "Call." Now type
the number you want to call.
Examples:
555-1212
l-(214)-352-3535
9/555-1212
30 / Dialing Telephone Numbers
Advertisement
