NEC Dterm Series I Quick User Manual page 2

ANSWERING CALLS
Receive incoming ring signal:

Lift handset (press flashing Line Key if
necessary).

Converse.
PLACING OUTSIDE CALLS

Lift handset.

Dial 9 for outside line.

Dial telephone number.

Converse.
NOTE: Press SPEAKER to dial and monitor a
call without using the handset. Lift handset to
converse or ensure MIC LED is lit to conduct a
hands free/speakerphone conversation.
HOLDING CALLS

Press HOLD key once.
NOTE 1: To return to a hold call, press flashing
line key.
NOTE 2: Hold calls will recall after a predeter-
mined time and ring and flash rapidly
on your phone.
TRANSFERRING CALLS
With a call in progress:

Press TRANSFER key.

Dial extension number.

Announce call (if desired).

Hang up to complete the transfer.
NOTE: If called station is busy or unanswered,
press TRANSFER key to return to the
original party.
CONFERENCE
3-Party Conference:
With a call in progress:

Press TRANSFER key.

Place second call and announce conference.

Press CONF key to establish conference.
LAST NUMBER REDIAL

Lift handset or press SPEAKER.

Press REDIAL key.

Press * to place call.
Display Telephone:

Lift handset or press SPEAKER.

Press REDIAL key until desired number is
displayed. Will display up to 5 previously
dialed numbers.

Press *. The number on the display is auto-
matically redialed.
CALL FORWARD - ALL CALLS
SET:

Lift handset.

Confirm you are connected to the extension
to be forwarded.

Dial * 3 then the destination extension.

Hang Up.

All calls will immediately be directed to that
extension.
CANCEL:

Lift handset.

Confirm you are connected to the appropriate
extension.

Dial # 3.

Hang Up.
CALL PICKUP
To answer an extension within a pre-assigned
Group:

Lift handset.

Dial * 2.

Converse.
PROGRAMMING ONE TOUCH KEYS
(If Assigned)
With telephone idle:

Press FEATURE key.

Press One Touch Key to be programmed.

Enter extension number to be stored OR
press 9 and outside telephone number.

Press FEATURE key to store.
Press One Touch Key to dial stored number.
PROGRAMMING SPEED DIAL
(If Assigned)

Lift handset.

Dial program code * 6.

Dial a speed memory code (0~9).

Enter 9 and telephone number to be stored.

Hang up and repeat for each number.
To dial a stored number:

Dial * 9.

Dial the memory location (0~9).
Revised 9/6/18