Front Panel Description - Scientific Atlanta WebSTAR DPR2320 User Manual

Front Panel Description

The front panel of your cable modem provides status lights that indicate how well and at what state your cable
modem is operating. After the cable modem is successfully registered on the network, the POWER and CABLE
status indicators illuminate continuously to show that the cable modem is active and fully operational. See Front
Panel Status Indicator Functions, later in this guide, for more information on front panel status indicator
functions.
1
2
3
4
5
6
POWER—Illuminates solid green to indicate that power is
1
being applied to the cable modem
RECEIVE DATA—Blinks to indicate that the cable modem is
2
receiving data from the cable network
SEND DATA— Blinks to indicate that the cable modem is
3
sending data to the cable network
CABLE—Illuminates solid green when the cable modem is
4
registered on the network and fully operational. This indicator
blinks to indicate one of the following conditions:
• The cable modem is booting up and not ready for data
• The cable modem is scanning the network and attempting
to register
• The cable modem has lost registration on the network and
will continue blinking until it registers again
PC—Illuminates solid green to indicate that an Ethernet/USB
5
carrier is present and blinks to indicate that Ethernet/USB
data is being transferred between the PC and the cable
modem
PC Wireless—Illuminates solid green to indicate that a
6
T10948
wireless access point is enabled and blinks to indicate that
wireless data is being transferred over the wireless
connection
Note: After the cable modem is successfully registered on
the network, the POWER (LED 1) and CABLE (LED 4)
indicators illuminate continuously to indicate that the cable
modem is online and fully operational.
Front Panel Description
7