Siemens SITRANS P ZD Series Operating Instructions Manual page 52

Technical data
Ambient temperature effect
Range turndown 1:5
Range turndown 1:10
Influence of vibration
Influence of power supply
Rated operating conditions
Ambient conditions
Ambient temperature
Temperature range for best readability
Storage temperature
Medium conditions
Medium temperature
Degree of protection
Electromagnetic compatibility
Emitted interference and noise immunity
Display and controls
Display
Position of decimal point
Limits
Display of limit violation
Parameter adjustment
Units
Damping
Design
Weight
Electrical connection
Process connection
50
Operating instructions
< ± 0.25% / 10 K (< ± 0.25% / 18 °F) of full scale
value
± 0.5% / 10 K (< ± 0.5% / 18 °F) of full scale value
0.05% / g to 500 Hz in all directions
(to IEC 68-2-64)
< ± 0.01% / V of full scale value
- 25 ... +85 °C (-13 ... +185 °F)
-10 ... +70 °C (-14 ... +158 °F)
- 40 ... +85 °C (-40 ... +185 °F)
- 30 ... +100 °C (-22 ... +212 °F)
IP65 to EN 60 529
To EN 61326 /A1 Appendix A (1998)
LCD, max. 5 digits, digit height 9 mm
Programmable
Programmable
Red LED and signal on LCD (↑ symbol / ↓ symbol
for upward or downward violation)
Via 3 buttons (M, ↑ symbol and ↓ symbol)
mA or % or physical variable
(default setting: bar)
Other units of measure: mbar, Pa, kPa, MPa,
mmH O, mH O, psi, inH O, ftH
2 2 2
torr, atm
Between 0.1 and 100 s
(step size: 0.1 s) programmable
About 0.6 kg (1.32 lb)
Via 2-pin plug with M16x1.5 cable inlet to EN
175301-803A, plastic
- G½A male and G / A female
1
8
- G½A to EN 837-1
- Internal thread: ½ -14 NPT
SITRANS P, ZD series
2
O, mmHg, kg/cm ,
2
A5E00249308-01