Zte AC8716 User Manual page 27

Common Failures Table:
Failures
Error occurs during the
program installation.
Open port failed.
No R-UIM card.
No signal indicated.
ZTE Corporation
CDMA2000 1X EV-DO Wireless Data Terminal User Guide
Causes
The setup file may Please
be damaged. WWW.ZTEMT.COM
Directly run the
software before the Close the software, plug in the Data Terminal and run it
Data Terminal is again.
plugged in.
The port is
occupied by other
applications, such
as "Hyper Close relevant software and run the software again.
terminal", or the
software is already
run.
R-UIM card is not
Insert R-UIM card.
inserted.
R-UIM card is not
inserted properly.
Sometimes the Please refer to User Guide. Properly insert R-UIM card.
front side and back
side are confused.
R-UIM card is
damaged. Validate
Replace R-UIM card.
by using a CDMA
terminal.
Antenna is not Insert the antenna into the Data Terminal.
Solutions
download the program
and reinstall it.
24
on our website
http://www.zte.com.cn