Delivery Contents................5 Tool Description ................7 3 Working with the CSC-Tool ............14 Precondition for the Use of the CSC-Tool........14 Placing the CSC Panel in Front of the Vehicle ......14 Placing the CSC Panel Centred in Front of the Vehicle ....17 Placing the CSC Panel Parallel to the Vehicle ......21 Adjusting the Height of the Reference Panel .......25...
• The CSC-Tool is exclusively intended for use on a vehicle. It is a precondition for the use of the CSC-Tool that the user has knowledge of automotive technology and is therefore aware of the sources of danger and risks in the repair shop and on motor vehicles.
Safety Precautions CSC-Tool Safety Precautions – Risk of Injury Safety Precautions – Risk of Injury When working on the vehicle, there is a risk of injury through inadvertent rolling of the vehicle. Therefore regard the following: • The park position should also be engaged in automatic vehicles.
Intended Use 2 Product Description Intended Use The Camera & Sensor Calibration Tool (CSC-Tool) is a system for calibrating driver assist systems suitable for all makes and models. Optional modules enable brand-specific adjustments of all kinds of systems. Therefore, in connection with a diagnostic tool from Hella Gutmann you are able to calibrate e.g.
Page 6
CSC-Tool for hidden damage. Any transport damage to the package supplied and damage to the CSC-Tool shall be registered in a damage report by the delivery service. 2. Open the package supplied and check for completeness based on the delivery slip.
CSC-Tool Product Description Tool Description 3. Remove the CSC-Tool from the packaging. 4. Check the CSC-Tool for damage and completeness. Tool Description 2.3.1 CSC Panel...
Page 9
CSC-Tool Product Description Tool Description Designation Reference panel Here you will need different reference panels depending on the car manufacturer. These are optionally available. Mirror cover/scale of cross member Here you can check whether the CSC Panel is placed centred in front of the vehicle.
Page 10
Product Description CSC-Tool Tool Description 2.3.2 HD-10 EasyTouch Designation Handle This handle makes it easier to carry the HD-10 EasyTouch. Scale of the HD-10 EasyTouch Here you can check whether the CSC Panel is placed parallel to the vehicle.
Page 11
CSC-Tool Product Description Tool Description Designation Set screw on scale Use this set screw to adjust and fix the scale. Attachment bracket for automobile Use this attachment bracket to attach the HD-10 EasyTouch to the tyre. Shaft with cross connector...
Page 12
Product Description CSC-Tool Tool Description Designation Output of the laser beam/laser beam Output for laser beam. Use the laser beam to read the actual value at the scales of the cross member and at the HD-10 EasyTouch. Mounting bolt Use this to adjust and secure the laser module.
Page 13
CSC-Tool Product Description Tool Description 3. Remove the batteries individually. NOTE Pay attention to correct installation direction/polarity 4. Reassembly in reverse order...
Precondition for the Use of the CSC-Tool 3 Working with the CSC-Tool The following steps are necessary to work with the CSC-Tool: 1. Place the CSC Panel in front of the vehicle. 2. Place the CSC Panel centred in front of the vehicle.
Page 15
CSC-Tool Working with the CSC-Tool Placing the CSC Panel in Front of the Vehicle 4. Regard the window with information and instructions. WARNING Sharp object Risk of injury/piercing Using the handle, always attach the HD-10 EasyTouch to the rim flange or tyre.
Page 16
Working with the CSC-Tool CSC-Tool Placing the CSC Panel in Front of the Vehicle 6. On the HD-10 EasyTouch, loosen the set screw of the shaft with cross connector (6). Now you can adjust the height of the shaft with cross connector.
CSC-Tool Working with the CSC-Tool Placing the CSC Panel Centred in Front of the Vehicle 10. Place the CSC Panel with the distance A, indicated in the diagnostic tool, to the centre of the wheel 1. 11. Perform steps 6 to 10 for the second HD-10 EasyTouch.
Page 18
Working with the CSC-Tool CSC-Tool Placing the CSC Panel Centred in Front of the Vehicle 1. Attach one HD-10 EasyTouch on the left and right rear wheel respectively. 2. Align the scales of the HD-10 EasyTouch at a right angle.
Page 19
CSC-Tool Working with the CSC-Tool Placing the CSC Panel Centred in Front of the Vehicle 3. The left and right mirror covers (2) of the cross member (4) should be tilted upwards. The scales of the cross member and mirrors are visible.
Page 20
Working with the CSC-Tool CSC-Tool Placing the CSC Panel Centred in Front of the Vehicle 5. Align the laser module (7) by turning the mounting bolt (2) on the scale of the cross member (4). The laser beam is indicated on the scale of the cross member.
CSC-Tool Working with the CSC-Tool Placing the CSC Panel Parallel to the Vehicle 6. Perform steps 4 + 5 for the second laser module. 7. By moving the CSC Panel laterally, place the panel in a way that the left and right scale of the cross member (4) show the same values.
Page 22
Working with the CSC-Tool CSC-Tool Placing the CSC Panel Parallel to the Vehicle 1. Align the laser beam (1) of the laser module (7) with the mirror (3) of the cross member (4). The laser beam will be reflected from the mirror to the scale of the HD-10 EasyTouch.
Page 23
CSC-Tool Working with the CSC-Tool Placing the CSC Panel Parallel to the Vehicle 3. By axially turning the CSC Panel, place the panel in a way that the left and right scale of the HD-10 EasyTouch show the same values.
Page 24
Working with the CSC-Tool CSC-Tool Placing the CSC Panel Parallel to the Vehicle 4. Switch off the laser beam (1) of the laser module (7) with the switch (3). 5. Use the adjusting screws of the base support (5) to adjust the horizontal and the vertical level gauge (6) of the cross member (4) and CSC Panel accordingly.
CSC-Tool Working with the CSC-Tool Adjusting the Height of the Reference Panel Adjusting the Height of the Reference Panel Proceed as follows to adjust the height of the reference panel: WARNING Movable reference panel Risk of injury or pinching Use only the handle to move the reference panel.
Page 26
Working with the CSC-Tool CSC-Tool Adjusting the Height of the Reference Panel 3. Use the handle (8) to move the reference panel (1) up to the height indicated in the diagnostic tool. 4. Check the height of the reference panel (1) using the color marking (10).
Page 27
CSC-Tool Working with the CSC-Tool Adjusting the Height of the Reference Panel 6. Slightly push the dipstick (9) upwards from the floor and fix it with the set screw of the measuring rod (9). Then it cannot be damaged when moving the CSC Panel again.
CSC-Tool Care and Maintenance 4 General Information Care and Maintenance • As with every tool, the CSC-Tool should also be handled with care. • Regularly lubricate moving parts with acid-free and resin-free grease or oil. • Re-tighten the mounting bolts regularly.
CSC-Tool General Information Technical Data for Laser Module Fax: +49 7668 9900-3999 Mail: info@hella-gutmann.com Technical Data for Laser Module General data Ambient temperature Recommended: 0 - 35°C Operating range: 0 - 50°C Supply voltage 2.7 - 3.3 V DC Batteries 2x 1.5 V AA...