Delivery contents ................5 Tool Description ................7 3 Working with the CSC-Kit Radar I .........10 Precondition for the Use of the CSC-Kit Radar I ......10 Calibrating the Radar Sensor without Magnetic Laser....10 Calibrating the Radar Sensor with Magnetic Laser.......11 4 General Information..............15 Care and Maintenance..............15...
1 Safety Notes General Safety Precautions • The CSC-Kit Radar I is exclusively intended for use on a vehicle. It is a precondition for the use of the CSC-Kit Radar I that the user has knowledge of automotive technology and is therefore aware of the sources of danger and risks in the repair shop and on motor vehicles.
Safety Notes CSC-Kit Radar I Safety Precautions – Risk of Injury Safety Precautions – Risk of Injury When working on the vehicle, there is a risk of injury due to rolling of the vehicle. The following must therefore be observed: •...
The CSC-Kit Radar I can be exclusively operated in combination with a Hella Gutmann diagnostic tool. Diagnostic tools from other manufacturers will not be supported.
Page 6
Product Description CSC-Kit Radar I Delivery contents Q Q u u a a n n t t i i t t y y D D e e s s i i g g n n a a t t i i o o n n...
1. Check the package delivered to ensure that it is not damaged. Should you identify any damage to the package, then open the package in the presence of the delivery service and check the CSC-Kit Radar I for hidden damage. Any transport damage to the package supplied and damage to the CSC-Kit Radar I shall be registered in a damage report by the delivery service.
Page 8
Product Description CSC-Kit Radar I Tool Description Designation Angular adjustment plate Level gauge Here you can check whether the angular adjustment plate is attached in the exact horizontal position. Attachment bracket of cross member Here the angular adjustment plate can be attached to the cross member.
Page 9
CSC-Kit Radar I Product Description Tool Description Designation Electromagnet Here you can fasten the magnetic laser to the angular adjustment plate. Level gauge Here you can check whether the magnetic laser is attached in the exact horizontal position. 2.3.3 Replacing the Batteries...
Precondition for the Use of the CSC-Kit Radar I 3 Working with the CSC-Kit Radar I The following steps are necessary to work with the CSC-Kit Radar I: 1. Place the CSC Panel in front of the vehicle (see operating instructions of CSC-Tool).
CSC-Kit Radar I Working with the CSC-Kit Radar I Calibrating the Radar Sensor with Magnetic Laser 4. Observe the info and instructions window. CAUTION Danger of injury or pinching through heavy parts The angular adjustment plate may drop when fixing it to the cross member and may cause injuries.
Page 12
Working with the CSC-Kit Radar I CSC-Kit Radar I Calibrating the Radar Sensor with Magnetic Laser 3. Select the system to be calibrated under >Basic settings<. A window with information and instructions appears. CAUTION Danger of injury or pinching through heavy parts The angular adjustment plate may drop when fixing it to the cross member and may cause injuries.
Page 13
CSC-Kit Radar I Working with the CSC-Kit Radar I Calibrating the Radar Sensor with Magnetic Laser 6. Turn the lever (3) at the magnetic laser of the electromagnet (5) to the left to ON. The electromagnet is activated and the magnetic laser can be fixed onto the angular adjustment plate.
Page 14
Working with the CSC-Kit Radar I CSC-Kit Radar I Calibrating the Radar Sensor with Magnetic Laser 9. Direct the laser beam (1) at the magnetic laser centred to the mirror of the radar sensor. The laser beam will be reflected from the mirror to the scale of the magnetic laser.
CSC-Kit Radar I General Information Care and Maintenance 4 General Information Care and Maintenance As with every tool, the CSC-Kit Radar I should also be handled with care. • Regularly lubricate moving parts with acid-free and resin-free grease or oil. •...
NOTE Batteries contain toxic substances. Therefore, do not throw used batteries into household waste but dispose of them properly. The batteries can also be sent to Hella Gutmann for disposal free of charge. Technical Data of the Magnetic Laser 4.3.1...
Page 17
CSC-Kit Radar I General Information Technical Data of the Magnetic Laser Class Operating range...