Advertisement
Advertisement
Table of Contents
Related Manuals for Monitor Audio IV140
Summary of Contents for Monitor Audio IV140
- Page 1 INSTALLATION INSTRUCTIONS...
-
Page 2: Installation Instructions
Installation Instructions 1. If using the pre-construction bracket, place this into position now prior to plaster-boarding. The plasterer can then fix the plasterboard around the pre-construction bracket. 400mm 2. If not using the pre-construction bracket and the plaster is all ready up, the location of the studs needs to be accurately determined. Draw around template ensuring the speaker is between the centres of the 400mm studs. - Page 3 3. Cut around the marked line. 4. Test fit the speaker ensuring it fits neatly in the cut out and that the screw holes line up with the studs. Do not try to remove the printed membrane off the front of the speaker. 5.
- Page 4 6. Once you are happy with the fit, wire up the speaker and test that it works. More bass can be achieved by removing the rear plastic square panel just below the terminal panel. Note: The sound heard outside of the wall and without plaster is not a true representation of the final sound you will get. 250 Hz...
- Page 5 7. Once you are happy with your installation and sound choice, screw the speaker in place 40 0m m (1 6” ) 1 0 0 1 5 0 2 0 0 2 5 0 Apply webbed tape over the screws so that it bridges the gap between the speaker membrane and the plasterboard.
- Page 6 Monitor Audio Ltd. 24 Brook Road Rayleigh, Essex SS6 7XJ England Tel: +44 (0)1268 740580 Fax: +44 (0)1268 740589 Email: info@monitoraudio.co.uk Web: www.monitoraudio.com Designed and Engineered in the United Kingdom. Made in China Version 1. 2017...
Need help?
Do you have a question about the IV140 and is the answer not in the manual?
Questions and answers