Battery Charging - Schumacher PS-2352 Instruction Manual

Pro-series battery charger for lead-acid batteries

Hide thumbs

Table Of Contents

Table of Contents

Available languages

CHARGER MUST BE ASSEMBLED BEFORE USING.

Before charging any battery, make sure the electrolyte (bat-

tery liquid) in each cell is at correct level.

Set all switches and timers to the OFF position. (Model

2352 does not have a timer.)

If the battery is being charged inside the vehicle, use con-

nection procedures outlined in Section F. Should the bat-

tery be removed from the vehicle, follow the instruction in

Section D, step 6 and Section G. Plug the power cord into

the AC outlet.

Set the charge rate switch to the desired charge position.

See Charge Rate Charts.

Set the timer from OFF position to desired timed charge,

30-135 minutes. (No timer on PS-2352).

BATTERY SIZE/RATING

Motorcycle,

SMALL

Garden Tractor,

BATTERIES

etc.

200 - 315 CCA

CAR/

315 - 550 CCA

TRUCKS

550 - 875 CCA

MARINE/

DEEP CYCLE

Charge rates for this on the front panel.

Based on battery at 50% charge.

Ampere Hours

Not Recommended

CCA Cold Cranking Ampere

Reserve Capacity

Marine Capacity