Door Handing - Schlage D-Series Brochure & Specs

Typical Wiring Diagram for Electrified Locks
AC Power Source – EL or EU
AC Operation
Rectifier
Plug
Rectifier used on AC operation unit only.
.35A @ 24V (Current requirements per lock)
DC Power Source – EL or EU
DC Operation
To Lock
.15A @ 24V (Current requirements per lock)
AC and DC Application
Cut as close to plug as
possible for DC operation.
Solenoid
Accessories
1-3/ 8˝ D-Series Lever Door Spacer*
XN12-012
"
*For installation on 1 doors, two (2) spacers are required. Specify finish.
Switch
Transformer
(Not Furnished)
(Not Furnished)
To Lock
24V AC
Switch
(Not Furnished)
Plug into solenoid
for AC operation.
Discard for DC operation.
Rectifier

Door Handing

All Schlage ® locks are reversible. Hand information is
necessary to ensure proper finish of latchbolt and strike
for split-finish locks. Fo l l ow the diagram to determine
the hand of the door. The outside is the secure side or the
corridor side.
115V AC
LH
Left Hand
LRB
Left Hand
24V DC
Reverse Bevel
RH
INSIDE
Right Hand
OUTSIDE
INSIDE
RRB
Right Hand
Reverse Bevel
OUTSIDE
11