Maintenance Considerations & Storage - Scag Power Equipment WALK-BEHIND SWZ-19KAI Operator's Manual

Swz series walk-behind
Hide thumbs Also See for WALK-BEHIND SWZ-19KAI:
Table of Contents

Advertisement

Section 2
WARNING
DO NOT use your hand to dislodge the clogged
discharge chute. Use a stick or other device to
remove clogged material after the engine has
stopped running and the blades have stopped
turning.
7.
Be alert for holes, rocks, roots and other hidden
hazards in the terrain. Keep away from any drop-
offs. Beware of overhead obstructions (low limbs,
etc.), underground obstacles (sprinklers, pipes, tree
roots, etc.). Cautiously enter a new area. Be alert for
hidden hazards.
8.
Disengage power to cutter deck before backing up.
Do not mow in reverse unless absolutely necessary
and then only after observation of the entire area
behind the mower. If you must mow in reverse,
maintain a constant lookout to the rear of the
machine and mow slowly.
9.
DO NOT turn sharply. Use care when backing up.
10.
Disengage power to cutter deck before crossing
roads, walks or gravel drives.
11.
Mow only in daylight or good artificial light.
12.
NEVER raise the deck with the blades engaged.
13.
Take all possible precautions when leaving the
machine unattended, such as disengaging the
mower, stopping the engine, and removing the key.
14.
Disengage power to the attachments when
transporting or when not in use.
15.
The machine and attachments should be stopped
and inspected for damage after striking a foreign
object, and damage should be repaired before
restarting and operating the machine.
CAUTION
Do not touch the engine or the muffler while the
engine is running or immediately after stopping.
These areas may be hot enough to cause a
burn.
DANGER
DO NOT run the engine inside a building or
a confined area without proper ventilation.
Exhaust fumes are hazardous and contain
carbon monoxide which can cause brain injury
and death.
16.
Keep hands and feet away from cutter blades and
moving parts. Contact can injure.
17.
Transport the mower using a heavy duty trailer
or truck. Insure the trailer or truck has all of the
necessary lighting and markings as required by
laws, codes, and ordinances. Secure a trailer with a
safety chain.
18.
Be cautious when loading and unloading onto
trailers or trucks. Use only a full width ramp.
19.
When transporting the mower, make sure the speed
control lever is in neutral, the neutral latches are in
the neutral lock position, the engine is off with the
key removed, the parking brake is engaged and the
wheels have been blocked.
20.
Tie the mower down securely using straps, chains,
cable, or ropes. Both front and rear straps must be
directed down and outward from machine.
21.
Use care when approaching blind corners, shrubs,
trees, or other objects that may obscure vision.
22.
NEVER leave the machine running unattended.
2.5
MAINTENANCE CONSIDERATIONS &
STORAGE
1.
Never make adjustments to the machine with the
engine running unless specifically instructed to do
so. If the engine is running, keep hands, feet, and
clothing away from moving parts.
2.
Place the speed control lever in neutral, engage the
parking brake, neutral latches in the neutral lock
position, stop engine and remove key or disconnect
spark plug wire to prevent accidental starting of the
engine when servicing or adjusting the machine.
Wait for all movement to stop before adjusting,
cleaning or repairing.
5
R

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents