Component Removal; Top Cover; Bin Door - Manitowoc UG Series Installation, Operation And Maintenance Manual

Operation

Component Removal

TOP COVER

For easiest access to the evaporator compartment, the
top cover can be removed.
1. Remove two screws on the rear of the ice machine.
2. Slide top cover back to disengage the three pins
from the front panel.
Remove two screws – slide
cover back to remove.
3-2

BIN DOOR

Allows access to the storage bin.
1. Remove top cover.
2. Slide door up until rear pins align with slot in door
tracks.
3. Lift rear door pins out and slide door up until front
door pins align with slot.
4. Lift door out of door track.
Align door pins with track slots,
then lift door out of track.
Part Number: 040003628 Rev. 01 01/14/18
Section 3